Services & Support

Service Guarantee

Download Center

FAQ

FAQ

图片名称

The USB device cannot be recognized on the signal generator

图片名称
A Check if the USB device is connected to other instruments or computers and can function properly. b. Confirm that the device used is a Flash type USB device, and this instrument does not support hard disk type USB devices. c. After restarting the instrument, insert the USB device for inspection. If it still cannot be used normally, please contact after-sales service.
图片名称

Signal generator signal modulation output incorrect

图片名称
a. Check if the signal connection cable is securely connected to the corresponding RF port. b. Check the connecting wire for internal damage. c. Check if the connecting wire is securely connected to the testing instrument. d. Check if both the "MOD ON" and "RF ON" button backlights are on, and check if the modulation status switch is turned on. e. Check if the modulation parameter settings are appropriate and adjust the modulation parameters appropriately. f. If using an external modulation source, please ensure that the external source is connected correctly and has an output, and work within the specified range of the signal source.
图片名称

What is the frequency range of the MSG150A microwave signal source module?

图片名称
The frequency range of the MSG150A microwave signal source module is 100kHz~15GHz, with ultra wide frequency band, excellent performance, and easy integration characteristics. The module has various practical functions such as continuous wave signal, analog modulation, pulse modulation, amplitude/frequency scanning, and low-frequency function waveform output, and has a very high cost-effectiveness. The module height is standard 1U, suitable for system integration and desktop testing and measurement equipment use. The complete standard SCPI command set and universal LAN interface bring great convenience for remote control and secondary development.
图片名称

How does a spectrograph save waveforms?

图片名称
1. Set the parameters on the spectrometer that require data collection. 2. After the waveform stabilizes, click the quick screenshot button on the software interface to save the waveform, or insert a USB flash drive to export the screenshot to the USB flash drive for saving.
图片名称

What precautions should be taken when powering up the spectrum analyzer for the first time?

图片名称
1) Check the power supply Before starting the machine, it is necessary to confirm that the AC power cord is reliably grounded before inserting the power cord plug into a standard three core socket. Do not use unprotected power cords. Floating or poor grounding can cause damage to the spectrum analyzer and even cause personal injury.
图片名称

How to use the signal generator?

图片名称
The method of using the signal generator includes setting parameters, selecting waveforms, adjusting the frequency, adjustment amplitude, adjustment phase, etc. The following is a specific explanation.
< 12 >